|
RCM5400W RabbitCore®
The RCM5400W RabbitCore module series provides Wi- Fi/802.11b/g functionality which enables you to create low-cost, embedded wireless control and communications solutions for embedded control applications.
Description
The RCM5400W RabbitCore module series provides Wi-Fi/802.11b/g functionality which enables you to create low-cost, embedded wireless control and communications solutions for embedded control applications.
RabbitCore modules mount directly onto a user-designed motherboard and act as the controlling microprocessor for the system. Measuring only 1.84" ª 2.85" ª 0.55" (47 mm ª 72 mm ª 14 mm), the Rabbit 5000 microprocessor-based RCM5400W series delivers the capability to integrate real-time control and Wi-Fi connectivity into your design.
The Rabbit 5000 delivers the same proven architecture as our industry-proven Rabbit 4000 microprocessor, along with additional features including hardware DMA, higher clock speeds, more I/O lines, six serial ports, and more instructions to reduce code size and improve processing speed.
Key Features
- Integrated Wi-Fi/802.11b/g wireless connectivity
- Up to 39 general-purpose I/O lines configurable
- Small size: 1.84” ª 2.85” ª 0.50” (47 mm ª 72 mm ª 13 mm)
Design Advantages
- Faster development time using a fully engineered, “ready-to-run/ready-to-program” microprocessor core module
- Easy C-language program development and debugging
- Complete development kit to get up and running quickly
- Large program memory and data storage
- Easily scalable for commercial deployment applications
Applications
- Industrial control
- Remote Terminal Unit (RTU)
- Serial-to-Ethernet bridge
- Building automation
- Remote monitoring and communications
- Security and surveillance
Developing with RabbitCores
The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and implementation of embedded systems. Develop programs with our industry-proven Dynamic C® development system, a C-language environment that includes an editor, compiler and in-circuit debugger.
Download the program from your PC via a USB or serial port, and debug right on the target hardware – no in-circuit emulation is required. This environment reduces effort and speeds hardware and software integration. Rabbit provides an extensive library of drivers and sample programs, along with royalty-free TCP/IP stack with source.
Jumpstart your evaluation and design efforts with a complete development kit, which includes a RCM5400W core module, prototyping board, Dynamic C integrated development environment and documentation on CD-ROM, serial cable for programming and debugging, and Getting Started manual.
RCM5400W RabbitCore Specifications
| Features |
RCM5400W |
RCM5450W |
| Microprocessor |
Rabbit® 5000 @ 73.73 MHz |
| Data SRAM |
512K |
| Program Execution Fast SRAM |
512K |
1 MB |
| Flash Memory |
512K |
1 MB |
| Serial Flash Memory |
1 MB |
2MB |
| Wi-Fi Compliance |
802.11b/g standard, ISM 2.4 GHz |
| Backup Battery Connection |
Supports RTC and data SRAM |
| General Purpose I/O |
Up to 39 parallel digital I/O lines |
| Serial Ports |
6 high-speed, CMOS-compatible ports |
| Slave Interface |
Use the RCM5400W as an intelligent
peripheral device slaved to a master processor |
| Real Time Clock |
Yes |
| Timers |
Ten 8-bit timers, one 10-bit timer, and one 16-bit timer |
| Watchdog/Supervisor |
Yes |
| Pulse-Width Modulators |
4 channels |
| Input Capture |
2 channels |
| Quadrature Decoder |
2 channels |
| Power |
3.3 V DC ±5%
625 mA @ 3.3 V while transmitting/receiving
175 mA @ 3.3 V while not transmitting/receiving |
| Operating Temperature |
-30°C to +75°C |
| Board Size |
1.84" ª 2.85" ª 0.55"
(47 mm ª 72 mm ª 14 mm) |
| Part Number |
20-101-1246 |
20-101-1247 |
| Development Kit |
U.S. and International (non-Japan): 101-1262
Japan: 101-1263 | 
RCM5400W data.pdf
|
.JPG)
.jpg)