ZIGBEE Tx/Rx+Integrated RCM UNIT	WIFI Tx/Rx+Integrated RCM UNIT

The RCM4510W next-generation RabbitCore module adds ZigBee®/802.15.4 connectivity to the existing Rabbit® 4000 microprocessor features allowing you to create a low-cost, low-power, wireless network as part of your control solution for your embedded application.

The RCM4510W RabbitCore module is equipped with an on-board ZigBee/802.15.4 modem for wireless connectivity. Features also include 512K flash memory and SRAM, 40 general-purpose I/O, and up to 9 general-purpose I/O 4 of which can be set up as analog inputs via the ZigBee module.

At the heart of the RCM4510W is the Rabbit 4000 microprocessor which features a clock speed of up to 29.49 MHz. Other features include hardware DMA, auxiliary I/O, quadrature decoder, input capture, GPIO lines shared with up to five serial ports, and four levels of alternate pin functions that include variable phase PWM. The Rabbit 4000 boasts an additional 500+ new operational code instructions that increases the processing efficiency, from its predecessor the Rabbit 3000.

The RCM4510W RabbitCore module is easily interchangeable with other RCM4xxx based products due to electrical and functional compatibility. With a small footprint of 1.84” x 2.42” (47 mm x 61 mm), the RCM4510W is compact and can easily be mounted directly onto a user-designed motherboard, along with CMOS-compatible digital devices.

Key Features

• RabbitCore module running @ 29.49 MHz
• On-board ZigBee/802.15.4 wireless connectivity
• 512K flash memory, 512K data SRAM
• Up to 40 general-purpose I/O lines configurable
• Up to 9 additional general-purpose I/O lines (up to four of which may be set up as analog inputs) available through the ZigBee modem
• Small size: 1.84 ª 2.85 ª 0.54 (47 mm ª 72 mm ª 14 mm)

Design Advantages

• Wireless mesh networking
• Low-Power

Applications

• Data Acquisition
• Point-of-Sale (POS)
• Building Automation