|
Poseidon products family
Network measurement of temperature, humidity, dry
contact inputs, analog values and other sensors
POSEIDON provide a ready to go control solution using Standrd IP Networking interface.
To monitor and control values over a network you can use several devices from the Poseidon family.
Device model has different sensor inputs, but the same network interfaces.
The Poseidon device supports up to 42 sensors, which can be placed up to 1000 meters from the
Poseidon unit. The measured values can be accessed over WWW for a supervisor or over M2M protocols (SNMP, XML, Modbus/TCP etc.) for monitoring software.
The Poseidon devices can increase the protection of your devices and data by
monitoring the environment, where your equipment is located.
• Indoor & Outdoor temperature, max range: -80°C..+650°C (-112 °F..1200°F)
• Relative Humidity
• Flooding or water presence
• Air-flow of fans
• Power supply failure
• Analog input value (V / mA)
• Door opening, Smoke detector, movement, etc
|
.JPG)
.jpg)
.jpg)
.jpg)